Groundhog Piles RX Prescribed Burn · Prescribed Fire · San Miguel County · 4m ago
Western Slope · Colorado
2044 resolved alerts kept for reference
Eastbound and westbound open. Between US 6; US 6 / 6th Avenue and C-470 (Golden) at Mile Point 260.8. The roadway is reopened to traffic.
Northbound and southbound open. Between Merkt Creek and County Road 57 (11 miles south of the Poncha Springs area) at Mile Point 114. The roadway is reopened to traffic.
Eastbound and westbound open. Between Hersch Avenue and Scenic Avenue (1 mile west of the Pagosa Springs area) from Mile Point 137 to Mile Point 138. The roadway is reopened to traffic.
Northbound and southbound open. Between Slick Rock and County Road 12S (35 miles south of the Naturita area) at Mile Point 23.5. Road maintenance operations. There is alternating traffic.
Northbound and southbound through lanes closed. Between CO 340 and US 50 (near Grand Junction) from Mile Point 1.11 to Mile Point 1.04. Road closed due to road construction. Starting Wednesday at 7:01AM MDT until September 14, 2026 at about 7:00AM MDT. Full schedule below: • September 9, 7:01AM - September 14, 7:00AM Comment: 4TH ST CLOSED TO THROUGH TRAFFIC BETWEEN PITKIN AND SOUTH AVE
Eastbound and westbound open. Between Exit 111: South Canyon and Exit 114: West Glenwood (1 mile west of the Glenwood Springs area) at Mile Point 112. The roadway is reopened to traffic.
Northbound and southbound open. Between Ross Road and Brookmont Road (near Indian Hills) at Mile Point 245.15. The roadway is reopened to traffic.
Eastbound and westbound open. Between Elk Creek Road and Red Creek Road (15 to 16 miles west of the Gunnison area) from Mile Point 140 to Mile Point 139. The roadway is reopened to traffic.
Eastbound and westbound open. Between County Road 7 and County Road 41A (3 miles west of the Howard area) at Mile Point 228. The roadway is reopened to traffic.
Northbound and southbound open. Between Lowell Boulevard and Raleigh Street (Denver) at Mile Point 258. The roadway is reopened to traffic.
The Labor Day Fire is burning in Bent County. It was reported on September 7. The latest mapping puts it at 50 acres. The cause is listed as natural. Data comes from the National Interagency Fire Center.
Eastbound and westbound open. Between Exit 221: Bakerville and Exit 226: Silver Plume (1 mile west of the Silver Plume area) at Mile Point 224. The roadway is reopened to traffic.